Clamps, Ties & Cords

Product Features

1. Resilient rubber grommet mount with steel load distribution cups and extended sleeve, designed to reduce transmission of structure born noise from air ducts and suspended equipments / small pipes.
2. Supplied complete with top and bottom steel load distribution cups, electro-galvanised after manufacture for maximum corrosion resistance.
3. Extended sleeve of rubber element prevents metal to metal contact between suspension rod and suspension bracket / trapeze channel.
4. Available in two different sizes to suit width of duct / equipment suspension channel.

Application

To control transmission of noise to the building structure, rubber grommet mounts serve as acoustic separators between sources of high frequency vibration and their suspension rods. Some example applications are illustrated above.

Designed for clamping plain or insulated pipe to structural channel supports such as trapeze hangers, floor stands and wall brackets. Provided with slotted holes for convenient installation.

Features

1. Electro galvanised post manufacture, to protect edges from corrosion. Also available with EPDM lining.
2. Full range of sizes available to be match the outer diameters of Easyflex Rubber Support Inserts (RSI) providing a simple and effective support solution for insulated pipe.
3. Also available with EPDM lining.

Application

Use for all general purpose and re protection lines. The knurled nut allows for hanger alignment and adjustment after installation.

Standard Material

Carbon Steel - Electro galvanized post manufacture

Application

Designed for suspending stationary level adjustment lines.

Design of hanger allows for vertical adjustment.

Standard Material

Carbon Steel - Electro galvanized post manufacture

Ductile iron C-clamp designed for providing attachment of threaded rod to steel beams or purlin, without the need for drilling or welding. Easyflex EFBC is suitable for installation at both upper and lower flanges of beams.

Features

1. Suitable for use with I-beams, channels, engles or steel roof purlins with up to 22 mm flange thickness.
2. Suitable for threaded rod sizes from 10 mm to 24 mm.
3. Convenient means of suspending pipelines, ducting, false ceilings or equipment form structural members, without the need for drilling or welding.
4. Permit vertical level adjustment post installation.
5. EFBC clamps are denoted as ‘universal’ on account of their versatile design, which provides a single product solution for various application situations.
6. a) They can be attached to either the upper or lower horizontal flanges of screw.
7. b) The threaded suspension rod may either be fixed offset from the edge of the flange or directly under an inline with the set screw.
8. The deep throat design of EFBC clamps help ensure an effective grip on the beam flange.
9. Supplied complete with hardened set screw, lock-nut.

Heavy duty U-Bolt designed to grip, guide or support plain and insulated pipes.

Features

1. Besides model listed in the table below, a full range of intermediate sizes is available to match the ODs of Easyflex RSI, providing a simple and effective support solution for insulated pipe. Heavy duty U-Bolt designed to grip, guide or support plain and insulated pipes.
2. Easyflex U-Bolt are available with EPDM sleeve, to prevent contact between dissimilar material when used o o with copper, plastic, aluminum or glass pipe. Lining has a temperature renge of -20 C to 110 C.

Split-ring type pipe clamps with integral fixing nuts. Suitable for ceiling suspension or vertical wall mounting of piping. Designed with a number of features to enhance product performance and reliability.

Features

1. Both halves of the clamp are ribbed, for greater strength.
2. Long thread engagement - All Easyflex EFPSC series split clamps are designed with extended thread lengths on the lips of the upper half. This ensures safer installation than clamps offered by others, that have barely one thread engagement also prevents loosening of the clamp’s
3. grip over a period of time due the minor vibration that is generally present in piping systems and causes thread wear.
4. Twin-thread Nuts - Clamps for pipe ODs 70mm to 123mm have M8+M10 twin-thread suspension nuts (as shown), for flexibility.
5. Side bolts have a slotted-cross head for convenience.
6. Custom designed stainless steel (SS 304 / 316) split clamps are available on request.

EPDM lined split-ring type pipe clamps with integral fixing nuts. Suitable for celling suspension or vertical wall mounting of piping. Designed with a number of features which enhance product performance and reliability.

Features

1. EPDM Lining - Easyflex clamps have high grade EPDM lining, which is significantly superior in terms of product life compared to commercial grade rubber as provided by some others.
2. Both halves of the clamp are ribbed, for greater strength.
3. Long thread engagement - All Easyflex EFRLC series split clamps are designed with extended thread lengths on the lips of the upper half. This ensures safer installation than clamps offered by others, that have barely one thread engagement also prevents loosening of the clamp’s
4. grip over a period of time due the minor vibration that is generally present in piping systems and causes thread wear.
5. Twin-thread Nuts - Clamps for pipe ODs 65mm to 116mm have M8+M10 twin-thread suspension nuts (as shown), for flexibility.
6. Side bolts have a slotted-cross head for convenience.
7. Custom designed stainless steel (SS 304 / 316) split clamps are available on request.